Was this bag inoculated last week or the week before? Which tub just produced its first flush? When you have more than one grow going, those little details can get surprisingly easy to mix up.
Our new Monotub Tracker Labels and Grow Tracker Stickers put your grow notes right where you need them: on the outside of your tub, spawn bag, or all-in-one bag. Both designs let you write, wipe clean with an alcohol pad, and start fresh.
Try Them Free: September 16–25, 2026
For a limited time, we're including free tracker label samples with All-in-One Bags and Large Monotub Kits from September 16 through September 25, 2026. It's an easy way to try keeping your grow records right on your setup.
Want labels for more of your grows? Both tracker designs are also available separately in reusable six-label kits with a marker and alcohol prep pads.
Monotub Tracker Labels: Follow Your Grow from Spawn to Harvest
Our Monotub Tracker Labels: Reusable Write & Wipe Kit gives each tub its own simple grow log. The larger 4-inch by 2.75-inch design has room to record:
- Species or strain
- Spawn mix date
- First pins
- First harvest
- Second harvest
- Notes
A quick glance tells you which grow you're looking at and when its key milestones happened. That makes it easier to keep multiple tubs organized and compare the timing of one grow with the next.
Removable Adhesive, Easy-to-Erase Surface
The monotub stickers use removable adhesive designed to hold on plastic tubs and peel off cleanly when you need to remove them. Their water-resistant BOPP film and gloss-laminated writing surface are made for the grow room.
When you're ready to clear your notes, simply wipe the writing with a 70% isopropyl alcohol pad. The smooth laminate keeps the marker ink on the surface so it can be erased easily. Let the label dry, then fill it in for your next grow.
For the most reuses, leave the label on the tub and wipe and rewrite it in place. Repeated peeling and moving can reduce the adhesive's grip.
Grow Tracker Stickers for Spawn Bags and All-in-One Bags
Our smaller Grow Tracker Labels: Reusable Write & Wipe Kit is designed for grain spawn bags, all-in-one bags, and grain jars. These 2.5-inch mushroom-shaped stickers keep the early stages of each grow easy to follow, with fields for:
- Species or strain
- Date inoculated
- Break & shake
- Fully colonized
- Batch and notes
Label a bag when you inoculate it, then add dates as the grow progresses. If you're working with several bags at once, the batch and notes area helps keep their histories straight without relying on memory.
Ready to Write, Wipe, and Reuse
Each kit includes six labels, one ultra-fine 0.4 mm marker, and two 70% isopropyl alcohol prep pads. Here's how to get started:
- Choose a clean, dry spot. Apply the label to the outside of your tub, bag, or jar. Keep filter patches, injection ports, air holes, and bag seals clear.
- Write down your starting details. Use the included marker and let the ink dry for about a minute before handling the writing.
- Add milestones as they happen. A few seconds of recordkeeping now makes your next check easier.
- Save your notes, then reset. Take a photo if you want a lasting record, wipe the writing away with an alcohol pad, and let the surface dry before writing again.
For bags and jars: Apply labels only after sterilization and cooling. The stickers should not go through a pressure cooker or sterilization cycle.
Give Every Grow Its Own Record
Whether you're following one all-in-one bag or managing a shelf of spawn and several monotubs, a clear label keeps the details with the grow.
Shop Monotub Tracker Labels or shop Grow Tracker Stickers for bags and jars. And from September 16–25, 2026, look for free tracker label samples included with All-in-One Bags and Large Monotub Kits.