Monotub Tracker Labels: Reusable Write & Wipe Kit (6 Pack + Marker)
Monotub Tracker Labels: Reusable Write & Wipe Kit (6 Pack + Marker) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Description
Description
Stop guessing when you spawned that tub. These reusable Monotub Tracker labels give every tub its own grow log: species or strain, spawn mix date, first pins, first and second harvest, plus a notes line. Write with the included ultra-fine marker, then wipe it clean with an alcohol pad when the run is done and use the same label on your next grow.
- 6labels
- 4" × 2.75"size
- BOPPgloss laminate
- 0.4 mmmarker tip
- Wipe& rewrite
What's in the Kit
- 6 Monotub Tracker labels, 4" × 2.75", individually cut and ready to peel
- 1 ultra-fine 0.4 mm marker for clean, readable writing in small spaces
- 2 alcohol prep pads (70% isopropyl) for wiping labels clean
Built for the Grow Room
Each label is printed on removable white BOPP film with a gloss laminate. The laminate keeps marker ink sitting on the surface, so a quick pass with alcohol lifts it right off. The film is water-resistant, so misting and a humid fruiting space won't make the print run. The removable adhesive holds on a plastic tub and is made to peel off without a sticky mess.
How to Use
- Wipe a spot on the outside wall or lid of your tub so it's clean and dry.
- Peel a label and press it on firmly, keeping it clear of filter patches and air holes.
- Fill in the species or strain and your spawn mix date. Let the ink dry for about a minute.
- Add first pins, first harvest and second harvest as your grow progresses.
- When the tub is finished, wipe the label with an alcohol prep pad and start your next log.
Tip: Leave the label on the tub and just wipe and rewrite it between grows. Every time a removable label is peeled and moved it loses a little grip, so rewriting in place gives you the most reuses.
Specifications
| Label size | 4" W × 2.75" H |
|---|---|
| Quantity | 6 labels |
| Material | Removable white BOPP film |
| Finish | Gloss laminate |
| Cut | Individually cut, custom tub shape |
| Tracking fields | Species/Strain, Spawn Mix Date, First Pins, First Harvest, Second Harvest, Notes |
| Marker | Ultra-fine 0.4 mm tip |
| Erase with | 70% isopropyl alcohol (2 prep pads included) |
Frequently Asked Questions
How do I erase the labels?
Wipe the writing with one of the included 70% isopropyl alcohol prep pads. The gloss laminate keeps the ink on the surface, so it lifts off and the label is ready to write on again. We tested ink that had dried for 24 hours and it wiped clean.
Where should I put the label on my monotub?
Stick it on a clean, dry outside wall or on the lid, away from filter patches and air holes. Wipe the spot first so the adhesive grips well. Don't apply it inside the tub, where condensation collects.
Can I move a label to a different tub?
Yes. The removable adhesive is made to peel off plastic cleanly. Each time a label is moved it picks up a little dust and loses some grip, so for the longest life, leave it in place and wipe and rewrite it between grows.
Will the labels hold up to fruiting chamber humidity?
Yes. The BOPP film and gloss laminate are water-resistant, so misting and humid grow spaces won't make the print run. Let fresh ink dry for about a minute before misting or handling the tub.
Do you have a smaller version for jars and grow bags?
Yes. Our Grow Tracker Labels use the same write-and-wipe design in a 2.5-inch size made for jars, grain spawn bags and all-in-one bags.
