Summer Growing Tips!

by | |

Summer is almost here!

With summer fast approaching, the warm weather always brings its own set of problems and benefits in the mushroom growing world.

Humidity: Mushrooms love that extra humidity, even in most climate controlled homes the humidity levels will rise and you will notice that in your mushroom growing setup as well. Humidity will be easier to maintain at lower temperatures. Make sure you allow for extra air exchange in your growing setup to prevent excess Co2 buildup. This is much more common during the summer months. Depending on your method of growing, run your air pump longer or drill additional holes in your fruiting chamber once the indoor humidity levels exceed 50%.

Temperature: Take advantage of the rising temperatures! This is the time to expand your growing setup! Reaching the perfect growing range of 76-80 degrees almost always requires an external heating source. During the summer it is much easier to find a spot in your home to grow where you won’t need a heating source; this will allow you to expand your setup with ease! Use a thermometer to find a warmer closet or room and close that A/C vent. Many homes or apartments have a warmer area, usually on the south facing wall.

Light: During the summer we have many extra hours of daylight. Take advantage of the best light source for growing mushrooms! Indirect light from the window is ideal for triggering growth and providing a full spectrum of light for the mushrooms to grow towards. If you are growing in a closet or dark spot, try our special mushroom light! Included with all our kits it’s the perfect spectrums to initiate pinning and provide perfect light to maximize growth!

Contamination: The warm weather across the United States and Canada also brings to life new types of mold and bacteria that lay dormant all winter long. That’s why we need to pay extra attention to detail when inoculating your jars or spawn bags during the summer months. We see many more incidents of contamination during these months even from experienced growers.

The infamous purple summer mold Alfa-Gibberella Zeaa. This mold is very common in Florida, Georgia and parts of California year round, but when farmers start planting and we start gardening outside in May this mold is released into the air across the USA. This mold is one of the more aggressive strains and can infiltrate your grow setup or cause havoc during inoculation.

Simply taking the extra steps and effort to be sterile can be the difference between success and failure.

Here are a few important steps you should not overlook during the summer:

  • While inoculating your substrate, always turn off all central air systems and close all windows. Make sure your work area is as still as possible.
  • Clean your work area and use Lysol Disinfectant spray all over your work area prior to starting.
  • Always flame sterilize your needles in between each jar or spawn bag. Use an alcohol lamp for a constant clean burning flame for best results.
  • UV-C Sterilizing has been shown to almost completely eliminate 99.99% of possible contamination when used during inoculation.
  • Peroxide 35% & UV-C light is the most effective protection against mold issues! Use for bulk casing grows, save contaminated cakes and more!
This entry was posted in no categories.